C60RX Tracked Brush Chipper

C60RX

Features

  • Tracked undercarriage - fully proportional remote controlled standard
  • Wide Infeed Opening: 254 x 457mm (10”x18”), excellent for processing foliage, brushy and forked branches
  • Vertical Anvil: Anvil positioned vertically (rather than horizontally) to reduce knife damage caused by abrasive material.
  • Hydraulic Pump: Belt driven off the engine. Even if cutting disk is jammed, the feed roller can still be reversed for clearing the branch material.
  • Clutch: Easy starting with soft start technology. Simple and reliable. Auto tensioning belt drive system.
  • Pivot Outlet Chute: Outlet chute can be pivoted vertically by 260mm to suit your truck height or your desired outlet height.
  • Outlet: 360° rotating chute with deflector and a positive locking system. No tools required for adjustments.
  • Feed Roller: Pivot type, operates with less friction, moves forward and up to within 10mm of knives.
  • Feed Control Bar: Pull to feed, push for reverse.
  • Feed Table: Folds away and is locked when transporting the machine.
  • Auto Sensor Feed: Electronically monitors engine RPM and controls feed roller to suit. Auto feed is operator adjustable by push button, LCD screen displays engine RPM & hour meter. Auto reversing for quicker engine recovery. Feedroller jams are reversed and cleared automatically, eliminating manual reversing of feedroller if a blockage occurs.
  • Finish: Media blasted surface, zinc shielded and powdercoated (Hansa green or optional colour of your choice).
  • Warranty: 12 month warranty (conditions apply).
  • New Zealand made for New Zealand conditions.
 

Watch action video of Model C60RX:

When the job takes you to difficult sites, over rough terrain, narrow access or soft ground conditions, you need a machine that’s up to the challenge. The rubber track drive is operated by a fully proportional remote control removing the operator from the danger zone.

Designed for professional use by arborists, parks & reserves, local bodies, orchards and hire centres. 

The powerful hydraulic feed system makes it easy to process any material. Its wide feed opening (18”) means bushy, twisted branches with forks are pulled into the machine without effort. You simply control the feedrate with the control bar and the rest is automatic. With the 360° rotating outlet chute the discharge direction can be changed within seconds.

Above: Model C60RX


Optional Hydraulic Winch

Take the back breaking work out of dragging branches by opting for the hydraulic winch with pulling power of 1800kg and freespool. Dyneema polymer rope is standard.

Controls include machine operated or wireless remote control function. Stabilisation legs provide additonal support.

Above: Model C60 hydraulic winch option, winch controls and stabilisation legs


Optional Hydraulic Lift & Crush

Great for additional down force to crush heavy foliage to aid feeding or quick clearing of feedroller jams by lifting the feedroller hydraulically. 

Can be controlled from either side of the chipper.

Above: Model C60 hydraulic lift & crush option

 

Optional Transport Trailer

Custom transport trailer giving you the best of both worlds - a towable or tracked chipper all in one! Chip while on the trailer or track to site.

Infeed height while operating chipper on the trailer is still at an ergonomic height.

Above: Model C60RX transport trailer

 

Specifications

General Length
Width
Height
Weight
3015mm (table closed) or 3145mm (table open)
1370mm
2100mm (minimum)
1920kg (2050kg with winch)
Engine Make & model
Type of fuel
65HP Kohler liquid cooled
Diesel
Capacities Fuel tank
Hydraulic oil tank
75L
100L
Tracked Undercarriage

Speed
Track drive
Undercarriage material
Track / chassis width

5km/hr max, fully proportional
Remote control
Rubber
1200mm

Chassis Frame description
100 x 50 x 5mm RHS
Cutting System Disk speed
Disk diameter
Shaft diameter
Knives
1620RPM
800 x 40mm
60mm
Four
Feed System Feed opening
Chipping capacity
Feed table height
Feed table length (to feed rollers)
Infeed chute opening
Roller style
Feed speed range
254 x 457 / 10" x 18"
254mm / 10"
700mm
1550mm
960 x 650mm
Single roller, spring mounted, 305mm / 12" diameter
0 - 40m/min / 135fpm with flow control, full reverse
Discharge System Discharge height
Degree of rotation
2100mm - 2360mm, adjustable
360°